Model: HFV-Z22、Z32、Z46
Describe: Excellent lubrication and flow properties.
Introduction: It is suitable for vacuum smelting, continuous metal spraying of plastics, vacuum distillation and low-density wind tunnel devices.
Package: 13.5kg/barrel, 170kg/barrel
The vacuum oil produced by Huifeng Enterprise is made of high-quality base oil and imported additives. It is an ideal lubricating material and is widely used in my country's military enterprises, display industry, lighting industry, solar energy industry, coating industry, refrigeration industry, aerospace, etc.
※ Extremely low saturated vapor pressure, large pumping rate and moderate limit pressure.
※ Good oxidation stability and chemical stability, the vacuum degree is not easy to drop when operating at continuous high temperature.
※ Excellent lubrication and flow properties.
※ Extremely low saturated vapor pressure, high pumping rate and moderate ultimate pressure.
※ Good oxidation and chemical stability to keep stabilization of vacuum degree under continuous high temperature.
※ Excellent lubricity and fluid ability.
※ HFV-Z22 is suitable for steam flow oil booster pumps with fast pumping speed.
※ HFV-Z32 and 46 are suitable for oil booster pumps with high ultimate vacuum requirements.
※ Suitable for vacuum smelting, continuous metal spraying of plastics, vacuum distillation and low-density wind tunnel devices.
※ In order to give full play to its vacuum performance, it must be used at the optimal heating power.
※ HFV-Z22 for vapor booster pump of large pumping rate.
※ HFV-Z32, 46 for oil booster pump with the high requirement of ultimate vacuum.
※ Applicable to extraction equipment, such as vacuum metallurgy, plastic coated metal, distillation and low density wind tunnel equipment.
※ The product is strongly recommended to be used under the optimum heat power.
Item/Level Item/Grade | HFV-Z22 | HFV-Z32 | HFV-Z46 | Test method Method |
Kinematic viscosity (40℃), mm2/s Kinematic viscosity | 19.8~24.2 | 28.8~35.2 | 41.4~50.6 | GB/T265 |
Flash point(open), ℃≥ cup) | 180 | 200 | 220 | GB/T267 |
Pour point, ℃≤ Pour point | -10 | -10 | -10 | GB/T3535 |
Corrosion Test (Copper Sheet, 100℃, 3h) Level ≤ Corrosion Test(T2Cooper, 100℃, 3h) | 1a | 1a | GB/T5096 | |
Anti-emulsification degree (40-40-0) ml, min Demulsibility 54℃≤ | 10 | 10 | 10 | GB/T7305 |
Foam characteristic (Foam tendency/stability) (Foam tendency/stability) 24℃≤ 93.5℃≤ 后24℃≤ Later | 100/0 100/0 100/0 | 100/0 100/0 100/0 | 100/0 100/0 100/0 | GB/T12579 |
Ultimate pressure, kpa≤ Extreme pressure | 5.0×10-5 | 5.0×10-5 | 5.0×10-5 | GB/T6306.2 |
Note: The above data are the measurement results of representative samples, and the product properties are subject to actual measurement.
The data above values of typical samples only. Product properties should refer to actual measurement.
Platform Information Submission-Privacy Agreement
· Privacy Policy
No content yet