Name: HFV-M High Vacuum Pump Oil Model: HFV-M Brief: Superior ability of emulsion resistance and oil-water separation when exposed to water vapor.
详细介绍
Performance
※ Fine purification, small amount of aromatic and gum.
※ High flash point and viscosity index to keep stabilization of vacuum degree at high temperature.
※ Superior ability of emulsion resistance and oil-water separation when exposed to water vapor.
※ Good oxidation stability,inhibition of grease stain and coking and extending the oil-change intervals.
Application
※ HFV-M series is applicable to various domestic and foreign mechanical vacuum pumps.
※ HFVM100 is suitable for sliding vane rotary vacuum pump and roots pump with volume flow rate of 4 Liter,esp.for refrigerating industry with large pumping.
※ HFVM200 can be applied to sliding vane rotary pump sith volume flow rate from 5 Liter to 30Liter,esp.in picture tube and illuminating industry.
※ Applicable to industries such as refrigeration,electro-vacuum,distilling,
cryodesiccation,biology,chemical,etc.
※ Be equivalent to Japan Moresco MR vacuum pump oil.
Typical data
Item/Grade
HFV-M100
HFV-M200
HFV-M250
Experimental
Method
Kinematic viscosity(40oC),
mm2/s
41.4~50.6
61.2~74.8
90~110
GB/T265
Viscosity index
100
100
100
GB/T2541
Flash point(open cup),
℃
225
240
250
GB/T3536
Pour point,℃
-10
-10
-10
GB/T3535
Demulsibility
(40-400)
ml,min
54℃
82℃
10
—
10
—
—
10
GB/T7305
Foam characteristic
(ml/ml)
(Foam tendency/s
tability)
24℃
93.5℃
Later24℃
80/0
50/0
60/0
80/0
50/0
60/0
80/0
50/0
60/0
GB/T12579
Extreme pressure,kpa
Differential pressur
Total pressure
2.0×10-5
2.0×10-4
2.0×10-5
2.0×10-4
2.0×10-5
2.0×10-4
GB/T6306.2
Note: use double-stage and double-excellent vacuum pump as extreme pressure test pump.
The data above values of typical samples only. Product properties should refer to actual measurement.
Package: 4L/Canteen、4Canteen /Case、16L/Bucket、 200L/Barrel